Shop

bobine_objet_PS
bobine_couchee_PSmulti-prise-tuyaubobine_PSbobine_pack_PS
  • 2 years warranty
  • Free hotline
  • Secure payment

OUR TIPS FOR THE BEST IMPRESSIONS

  • Turn off the fan
  • High-temperature printing: 90-100°C for the bed and 240-250°C for the extruder
  • Use a base: spray, band or use of a “raft”
  • It is possible that the bed is not uniformly heated: try to print as close to the centre as possible
  • Slow down the printing speed for the first layer
  • Reduce the height of the first layer
  • For optimal conservation of the filament, store it in a dry place at ambient temperature

OWA 3D Filaments have been tested on the following machines

  • 3ntr
  • Airwolf HDx
  • Dagoma
  • Foldarap 2.5
  • HotEnd All in One
  • Leapfrog Creatr
  • Makerbot Replicator 2x
  • Malyan M180
  • Mutoh MF-1000, Mutoh MF-1050, Mutoh MF-1100, Mutoh MF-1150, Mutoh MF-2000, Mutoh MF-2200D, Mutoh MF-MF-500, Mutoh MF-600T
  • Ord Bot Hadron
  • Raise3D N2 Plus
  • Tobeca
  • Ultimaker 2
  • Volumic Stream 30
  • Wanhao Duplicator 4S
  • Zortrax M200

DOWNLOAD THE TECHNICAL DATA SHEET FOR PS OWA

  • Material: Recycled and Recyclable PS
  • Diameter tolerance : ± 0,05mm
  • Printing temperature: 210-260°C
  • Heated bed temperature: 60-100°C
  • Recommended printing speed : 40-100 mm/s
  • The use of a heated bed is strongly advised

PACKAGING

Our spools are sealed airtight and packaged in our OWA cardboard box.

HIGH QUALITY

Tests are carried out at each production stage to ensure the regularity of our filaments (no air space and no out-of-roundness) and guarantee their compatibility with all printers. The tests are conducted in our in-house characterization lab.

COLLECTION SERVICE 

Along with our eco-conceived filaments, OWA offers a collection service to ensure the recycling of 3D printing waste (filament offcuts, reels, failed printed objects). From 10 purchased spools, you can order your collection box and activate this entirely free service!

2-YEARS WARRANTY

After expert appraisal by its technical services, OWA undertakes to exchange a filament diagnosed as defective free of charge, subject to it having been used and stored in a normal manner.

Where to go in case of technical issues?

It’s easy, you can call our free international hotline 00 800 4038 4000, from Monday to Friday, 8:00 AM to 12:00 PM and from 1:00 PM à 5:00 PM (GMT+2) or send us an email at contact@owa3d.com. OWA Filaments are under a two-years warranty, under the condition of normal use and stocking.

What is the maximum quantity I can order?

You can order up to 15 spools on the website. If you need more spools, please contact us at contact@owa3d.com or through our contact form.

What are the available payment methods?

You can pay with credit cards or through PayPal. However, if you are a school, administration or your order is more than 15 spools you can ask for a quote to write a purchase order.

How much are shipping costs?

The shipping costs are not fixed. It depends on the weight and volume of the products and will be calculated when you order. Shipping costs will be free when you order more than 85€ TTC of filament.

What is the delivery time?

We commit to providing you with your order in less than 72 hours. It depends on when you ordered and where you are.

If you ordered before 12:00 PM (GMT+2), your delivery will take less than 48h.
If you ordered after 12:00 PM(GMT+2), your delivery will take less than 72h.

How to activate the collection service?

By purchasing OWA products, you become entitled to our collection service. To ask for the activation of the service, please contact us by email at contact@owa3d.com or through the contact form.

THEIR OPINION :

Stéphane Malaussena, co-founder VOLUMIC 3D:

“The arrival of a new filament on the market is always welcome, all the more so when it offers not just a new and efficient material but also a holistic and environmentally-friendly approach. Printouts in OWA PS are of quality, objects are printed with a suitable profile similar to ABS but with greater simplicity. Between 2 filaments at the same price, you might as well choose the most environmentally-friendly one every time.”

René Lempereur, Drone designer, ASA:

“The arrival of a new filament on the market is always welcome, all the more so when it offers not just a new and efficient material but also a holistic and environmentally-friendly approach. Printouts in OWA PS are of quality, objects are printed with a suitable profile similar to ABS but with greater simplicity. Between 2 filaments at the same price, you might as well choose the most environmentally-friendly one every time.”

Cédric Arsiquaud, REFERENCES 3D  :

“The OWA 3D PS filament, mainly designed for power users, is pleasant to print and process after printing. Furthermore, its greasy texture is very pleasant and of quality. This material is easy to smooth out with the same finishing solutions as those used for ABS.”

Alexandre Vanhoutte, FABLAB73 (Fablab) :

“In my opinion, the strong point of OWA filaments is that they are environmentally-friendly and recyclable, representing the future and giving an excellent image of 3D which can print objects like that.”

YOU CAN ALSO SHARE YOUR IMPRESSIONS, WRITE TO US AT CONTACT@OWA3D.COM

SKU: PS1025OW Categories: ,
  • 2 years  WARRANTY

  • free hotline

  • 24 hours delivery

  • Secure payment